Waste and Raw Water Treatment

PA 1300

GENERAL DESCRIPTION

PA 1300 is high efficiency polyelectrolytes for water treatment. These flocculants are organic, water soluble, high molecular weight, highly charged anionic flocculants polymers. PA 1300 is usually used as a coagulant aid for sedimentation or floatation of suspended solids in industrial water. It is effective in treatment of wastewater from dyeing, leather, food, paper industry and treatment of muddy water.

TYPICAL PRODUCT PROPERTIES

Appearance : White Granular powder pH (0.1% solution) : 6.0 – 8.0 Active Content : 100% Ionic Degree : High

APPLICATION /PENGGUNAAN PA 1300 is generally prepared as a 0.1% (1g/l) solution prior to dosing into the systems. Care should be taken whilst preparing the solutions as high shear mixing at the mixing point must be used in order to ensure powders are proper dissolve.

DOSAGE AND CONTROL

Typical dosage depends on the nature of the substrate being treated but generally ranges from 0.1- 3ppm. Our representative will provides you with proper control requirements for your specific application.

HANDLING PROCEDURE

Wear safety face shields or goggles, rubber gloves,long pants and long sleeve shirt when handling. Please refer material safety data sheets for details on health and safety information.

ADDITIONAL INFORMATION

PA 1300 is FDA acceptable in accordance with 40 CFR 141.111 requirements up to maximum use of 1mg/L.

PACKAGING

PA 1300 is available in 10 kg bag.