Waste and Raw Water Treatment

CESTFLOC 1223

GENERAL DESCRIPTION
CESTFLOC 1223 is a liquid inorganic coagulant with high cationicity for use in potable, industrial wastewater treatment applications.

PRODUCT APPLICATION
CESTFLOC 1223 is used as an effective coagulant in a wide variety of liquid-solids separation processes. It is designed to function over a wide pH range. CESTFLOC 1223 eliminates the use of aluminium and iron salts to get excellent clarification at lower dosages. The need of pH adjustment is also set to minimal. Being a complete solution by itself, this product provides a simple, convenient, one drum water treatment program.

TYPICAL PRODUCT SPECIFICATION
Appearance : Colourless solution
Specific gravity (ambient temperature oC) : 1.32-1.36
Active concentration (as Al2O3)% min : 23.0 -24.0
pH (1 %w/v solution) : 4.0 – 5.0
Basicity % : min. 80
Viscosity @ 25oC : <50 cP

DOSAGE AND CONTROL
Product dosage shall depend on the type of system, operating condition, nature and extent of contamination and degree of control required. Our representative shall provide you with proper control requirement relevant to your specific application. CESTFLOC 1223 is recommended to feed as neat solution through a diaphragm dosing pump with inline dilution before dosing point. Dosing should be positioned at points of good distribution and mixing.

PRODUCT HANDLING AND STORAGE INFORMATION
Due to the mildly acidic nature of CESTFLOC 1223, operators are advised to wear chemical splash goggles, rubber gloves and coverall when handling the product. Please refer to Material Safety Data Sheets for more specific details on health and safety information of product. As CESTFLOC 1223 is mildly corrosive to iron, copper and aluminium alloys, storage tank and chemical feed system should be constructed of PVC, HDPE, LDPE, PP, FRP and most rubbers.

PRODUCT PACKING AND STORAGE INFORMATION
CESTFLOC 1223 is supplied in 275kg or bulk tank.