Waste and Raw Water Treatment

CESTFLOC 1218

GENERAL DESCRIPTION
CESTFLOC 1218 is a medium basicity liquid coagulant manufactured to meet Malaysian Standard MS 1454 : 2007. It is more than a quality and effective coagulant suitable for the treatment of industrial waste water due to the following advantages.

● Reduced pH adjustment
● Reduced sludge volume
● Superior removal of turbidity
● Performs well in wide working pH range

PRODUCT APPLICATION
CESTFLOC 1218 is recommended to feed by diaphragm metering pumps of non-corrosive material into raw water where good distribution and mixing can be assured.

PRODUCT SPECIFICATION
Appearance : Yellow liquid
Aluminium : 8.5% to 8.7%
Al2O3 : Minimum 16.0%
Iron as Fe : < 0.01%
Specific gravity : 1.32 – 1.36
pH @ 25C : 3.5 – 4.5
Basicity : 42 – 44%
Viscosity @ 25C : Approximately 17 – 27 mPas :

DOSAGE AND CONTROL
Dosing by diaphragm metering pumps of non- corrosive material is suitable. Treatment dosage will depend on the type of system, operating condition, nature and extent of contamination and degree of control required. Our representative will provides you with proper control requirements for your specific application.

PRODUCT STORAGE INFORMATION
Storage tanks should be constructed of corrosion resistant material such as fibreglass, PVC, HDPE or rubber lined. Piping and valves must also be made of corrosion resistant material such as PVC or Teflon.

PRODUCT HANDLING INFORMATION
Wear eye protective glasses, rubber gloves and protective clothing when handling. In case of contact with with eyes, immediately flush eyes with plenty of water for at least 15minutes. For skin contact, flush contact area with plenty of water. If leakage occurs, flush with plenty of water and neutralize with lime. Please refer Material Safety Data Sheets for details on health and safety information.

PRODUCT PACKING INFORMATION
CESTFLOC 1218 is available in various packaging ranging from 25kg to tanker load of 10 – 16MT.