Waste and Raw Water Treatment

Cestfloc 1175

GENERAL DESCRIPTION
Cestfloc 1175 is a liquid cationic polyquarternary ammonium polymer supplied in easy-to-use soluble form as coagulant and/or coagulant aid in the clarification of water where it can partially or totally replace conventional inorganic metal salts. Such water includes raw water for potable or industrial usage, industrial circulating process water and effluent, municipal sewage, textile waste water etc. The strong coagulating power of CESTFLOC 1175 improves the color and quality of treated water by producing dense, big and fast-settling floc which in return increase clarifier throughput. The use of CESTFLOC 1175 reduces water wastage in de-sludging operations, improves filtrability of sludges and reduces carry-over of floc into the filters thereby extending filter life between backwashing operations.

PRODUCT APPLICATION
CESTFLOC 1175 should be diluted with clean water prior to dosing. Dosing point should has good distribution. Mix coagulant continuously with the water to be treated to optimize performance. If CESTCFLOC 1175 coagulant is used in conjunction with inorganic coagulant, the inorganic coagulant is usually added first but in most cases, both products can be dosed at the same point. CESTFLOC 1175 may also be pre-mixed with inorganic coagulant. In cases where a secondary coagulant/flocculant is used, CESTFLOC 1175 should be dosed first.

PRODUCT SPECIFICATION
Appearance : Clear colorless liquid
pH @ 25°C : 5 - 7
Specific Gravity : 0.99 – 1.03

DOSAGE AND CONTROL
Treatment dosage will depend on the type of water or effluents and degree of control required. Our representative will provides you with proper control requirements for your specific application.

PRODUCT HANDLING INFORMATION
CESTFLOC 1175 should be stored in a cool dry place. Avoid spillage of product as spilled product is slippery. Wear goggles and rubber gloves when handling. Please refer material safety data sheets for detail on health and safety information.

REGULATORY INFORMATION
CESTFLOC 1175 comply with ANSI Standard 60 where the level of aluminum in the finished drinking water shall not exceed 2 mg/L.

PRODUCT PACKING INFORMATION
CESTFLOC 1175 is available in 30kg carboy and 200kg drum.