Boiler Water Treatment

CESTCHEM 2732

GENERAL DESCRIPTION
CESTCHEM 2732 is used for reducing silica in the feed water for steam generating system operating at 400 - 450 psi by reducing feed water silica up to 10 ppm. Therefore it is suitable for water source with silica 20 to 25 ppm. It converts silica into soft sludge with aid of CESTCHEM 2555 to disperse these silica sludges in the boiler water, thus reducing the threat of silica depositing on turbine blades and steam receiver. Short says, it reduces silica volatization and increases boiler operational cycles by 2 to 2.5 times as compared to untreated feed water.

PRODUCT APPLICATION
CESTCHEM 2732 can be dissolved in water at any convenient dilution. The resultant solution cannot mix with other boiler water treatment additives. Therefore, it is advisable to fed thru’ separate chemical pump and tank.

PRODUCT SPECIFICATION
Appearance : White dry powder.
pH @ 25C (1%) : 6.5 – 8.0
Specific gravity @ 25C : 2.5 – 2.7
Flash point : None

DOSAGE AND CONTROL
Dosage of CESTCHEM 2732 shall depend on the silica level of the feed water. It is estimated every ppm of silica in the feed water requires 7.5 ppm of CESTCHEM 2732. Our representative will determine the proper dosage after studying your system.

PRODUCT HANDLING INFORMATION
CESTCHEM 2732 is a powder product. Use goggles and rubber or PVC gloves when handling the product. The inner polypropylene bag should be properly tightened after every usage to prevent caking due to moisture. Please refer to material safety data sheet for further precaution if necessary.

REGULATORY INFORMATION
CESTCHEM 2732 complies with US FDA 21 CFR § 173.310 (Boiler Water Additives) for use in treating boilers or steam lines where the steam produced may contact edible products. CESTCHEM 2732 is registered with NSF Nonfood Compounds Program. NSF Registration No. 149284

PRODUCT PACKING INFORMATION
CESTCHEM 2732 is supplied in 25 kg / carboy.