Boiler Water Treatment

CESTCHEM 2250

GENERAL DESCRIPTION
CESTCHEM 2250 alkalinity booster is recommended primarily for raising the pH of feed water and maintain the alkalinity of boiler water. Adequate alkalinity is required to prevent corrosion and to precipitate calcium and magnesium hardness as desired sludge.

PRODUCT APPLICATION
CESTCHEM 2250 can be fed continuously as neat or diluted solution to the preboiler section through a chemical fed pump.

PRODUCT SPECIFICATION
Appearance : Colorless liquid
Specific gravity @ 25°C : 1.45 – 1.55
pH (1% solution) : 12 – 14
Flash point : None

DOSAGE AND CONTROL
Dosage CESTCHEM 2250 will depend on the pH of feed water, the steam evaporation rate and the hardness of feed water. Adjust CESTCHEM 2250 dosage to maintain a caustic alkalinity of 200 to 400ppm (as CaCO3) and pH of 10.0 to 11.5.

PRODUCT HANDLING INFORMATION
CESTCHEM 2250 is a strong alkali. It causes severe burns of skin, eyes and clothing. In case of contact, flush the affected areas with plenty of water for at least 15minutes and see a doctor as soon as possible. Use goggles and rubber /PVC gloves when handling.

REGULATORY INFORMATION
CESTCHEM 2250 complies with US FDA 21 CFR 173.310 (Boiler water additives) for use in treating boilers or steam lines where the steam produced may contact edible products. . CESTCHEM 2250 is registered with NSF Nonfood Compound Program. NSF Registration No. 145820.

PRODUCT PACKING INFORMATION
CESTCHEM 2250 is supplied in 30 kg/carboy.